Advanced Diagnostics MVP PRO User Manual page 59

M V P &
powered
ADVANCED DIAGNOSTICS USA
by
TCODE
RESET Immobilizer - TYPE 6
RESET Immobilizer
PLEASE INSURE THAT
THE DRIVER DOOR IS
OPEN DURING THE
PROCEDURE
PRESS ENTER KEY
RESET Immobilizer
PLEASE WAIT
TIME REQUIRED 16:00
TIME ELAPSED 00:00
BACK TO EXIT
RESET Immobilizer
PROCEDURE COMPLETE
TURN IGNITION OFF
REMOVE KEY
INSERT KEY
SWITCH IGNITION ON
PRESS ENTER KEY
PROGRAM KEY
INSERT MASTER KEY
SWITCH IGNITION ON
PRESS ENTER KEY
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
TOYOTA
Continued...
TOYOTA
ADVANCED DIAGNOSTICS USA
PROGRAM KEY
PLEASE WAIT
45 Sec
TIME ELAPSED: 0
PROGRAM KEY
PROCEDURE COMPLETE
PRESS ENTER KEY
IMPORTANT NOTES:
On Toyota Type 636 it's important to make sure
the immobilizer light stops blinking at the end of
the procedure. It's also important to Press Enter
prior to disconnecting the tester.
Make sure to wait until the light stops blinking
and also press Enter before disconnecting the
tester.
If you are using MVP, stay connected and go to
PROGRAM KEYS to add any additional keys
you may have. (If needed)
M V P &
powered
by
TCODE
593