M V P &
TCODE
RESET Immobilizer - PROX
(Use this method if you have no PROX Remotes)
Touch the Emblem side of the PROX
Remote to the START Button on the
dash. The Emblem side is the side
without the buttons on it and has either
the Toyota or Lexus symbol on it.
If the Prox is not detected:
1. Check that it's the correct
part number. (Many look a like
but are incompatible)
2. That the battery inside the
Prox is new.
3. That the battery voltage on
the vehicle is at least 12 volts.
556
TOYOTA
PROGRAM KEYS
PLEASE WAIT
BACK' TO EXIT
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.
ADVANCED DIAGNOSTICS USA
PROGRAM KEYS
PROCEDURE COMPLETE
NUMBER OF KEYS
PRESS ENTER KEY
PROGRAM KEYS
KEY DETECTED
REMOVE KEY
TIME 30
BACK' TO EXIT
PROGRAM KEYS
TOUCH ENGINE SW
WITH EMBLEM SIDE
OF REGISTERED KEY
TIME 28
PRESS ENTER TO CONT.
If you have more to
program, touch the next
one to the START Button,
otherwise press ENTER
on the tester to finish the
procedure.
We Recommend keeping
only one Prox in the car
at a time. Take any others
outside the car, as we have
seen them interfere with
each other.
powered
by
1
Need help?
Do you have a question about the MVP PRO and is the answer not in the manual?
Questions and answers