Alternative - On-Board Programming For Prox And Rke Functions - Advanced Diagnostics MVP PRO User Manual

M V P &
powered
TOYOTA
ADVANCED DIAGNOSTICS USA
by
TCODE
Alternative - On-Board Programming
for Prox and RKE functions
Included here as a courtesy,
Not supported by Tech Support.
Step 1- It's very important to make sure all the doors are closed except the
drivers door, that remains open.
Step 2- insert the Prox in and out of the slot twice.
Step 3- close drivers door twice, then leave it open.
Step 4- insert the Prox in slot once and pull it out.
Step 5- close the drivers door twice, then leave it open.
Step 6- insert the Prox in the slot & leave it in.
Step 7- close the drivers door once.
Step 8- turn the ignition on once, then turn it off.
Step 9- take the Prox out of the slot and the door locks should cycle.
Step 10- Next press the lock & unlock buttons together on the Prox for 1 sec-
ond. Then press the lock button for 3 seconds.
Step 11- locks should cycle.
Step 12-To exit the learning mode open the door & close it.
Now open it again.
You are done! Now test your Prox key functions to be sure they work.
588
Advanced Diagnostics USA Manual for MVP & TCODE PRO – Copyright 2014 Advanced Diagnostics USA INC.