Step Component
Interface
⑥
WARNING
P.C. board
Do not detach the inverter for 5 minutes after
turning off the breaker as doing so may cause
electric shocks.
1) Perform Step 1 of ① and 3) of ⑤.
2)
the board to remove the interface P.C.board.
3) Mount a new interface P.C. board.
⑦
WARNING
P.C. board
Do not detach the inverter for 5 minutes after
turning off the breaker as doing so may cause
electric shocks.
1) Perform Step 1 of ①, Step 3) and Step 4) of ⑤.
2)
P.C. board attachment plate, and pull the
attachment board in the direction of the arrow
to remove it.
(M4×8, 4)
3) Remove the connector connected between the
CN01 .....Connection with power supply terminal block (L) (black)
CN02 .....Connection with power supply terminal block (N) (white)
CN08 .....Connection with comp-IPDU P.C. board (CN511) (red)
P01 ........earth screw
4) Remove the 2 screws and support hooks (2
remove it.
5)
Procedure
158
Remarks
Interface P.C. board
Support (8 positions)
Screws
(4 positions)
Interface
P.C. board
attachment plate
Screws (2 positions)
Noise filter P.C. board
Support (2 positions)