Tuner Operations; Tuning To Radio Stations; Presetting Radio Stations; Using The Plug And Play - Philips LX3600 User Manual

Tuner Operations

IMPORTANT!
– Make sure the FM and AM
antennas are connected.

Tuning to radio stations

1
Press TUNER on the remote (or press
SOURCE control on front panel) to
select "FM" or "AM".
2
Press 3 / 4 briefly on the remote.
"SEARCH" appears.
The next radio station will tune
automatically.
3
To tune a weak station, press S / T
briefly and repeatedly until an optimal
reception is found.
38
001-046_LX36_17_Eng

Presetting radio stations

You can store up to 20 FM and 10 AM
preset radio stations in the memory.
Helpful Hints:
– The system will exit presetting mode if no
button is pressed within 20 seconds.
– If no stereo frequency is detected during
Plug and Play, "CHECK ANTENNA"
appears.

Using the Plug and Play

Plug and Play allows you to store all
available radio stations automatically.
AUTO INSTALL PRESS PLAY
1
For first time setup, on the DVD system
press SOURCE or TUNER to select
TUNER mode,
"AUTO INSTALL PRESS PLAY"
appears.
2
Press ÉÅ on the front panel to start
installation.
"INSTALL TUNER" appears.
All previously stored radio stations will
be replaced.
Once completed, the last tuned radio
station will play.
FM followed by AM bands will be
stored.
38
PLAY/PAUSE
VOLUME
OPEN/CLOSE PLAY/PAUSE STOP
PREV NEXT
IR SOURCE
3139 115 22851
29/08/2003, 2:45 PM