Step 5: Connecting Fm/Am Antennas; Step 6: Connecting The Power Cord - Philips LX3600 User Manual

Step 5: Connecting FM/AM
antennas
fix the claw
into the
slot
VIDEO OUT
Y CVBS
Pr Pb S-VIDEO
1
Connect the supplied AM loop antenna
to the AM jack. Place the AM loop
antenna on a shelf or attach it to a stand
or wall.
2
Connect the supplied FM antenna to the
FM jack. Extend the FM antenna and fix
its ends to the wall.
For better FM stereo reception, connect
an external FM antenna (not supplied).
MW
Helpful Hints:
– Adjust the position of the antennas for
optimal reception.
– Position the antennas as far as possible
from your TV, VCR or other radiation source
to prevent unwanted interference.
001-046_LX36_17_Eng
FM
antenna
AM
1
antenna
2
FM/AM ANTENNA
FM 75
AM
FM ANTENNA
15
Connections
Step 6: Connecting the
power cord
~AC
MAINS
COMPONENT
VIDEO IN
S-VIDEO
IN
Pr/Cr
AUDIO
OUT
~ AC MAINS
Pb/Cb
VIDEO IN
Y
After everything is connected
properly, plug in the AC power cord
to the power outlet.
Never make or change any connections
with the power switched on.
On the DVD system, press SOURCE
to select TUNER mode,
"AUTO INSTALL PRESS PLAY" may
appear on the display panel. Press
on the front panel to store all available
radio stations or
press Ç to exit (see page 37 "Tuner
Operations").
AUTO INSTALL PRESS PLAY
TEM
IR
29/08/2003, 2:44 PM
power outlet
É Å
PLAY/PAUSE
VOLUME
OPEN/CLOSE PLAY/PAUSE STOP
SOURCE PREV NEXT
15
3139 115 22851