Using S-Video Jack; Using An Accessory Rf Modulator - Philips LX3600 User Manual

Connections
COMPONENT
VIDEO IN
S-VIDEO
IN
AUDIO Pr/Cr
OUT
Pb/Cb
VIDEO IN
Y
2
AUDIO
L
REAR SUB-
LEFT W
R
TV IN AUX-IN LINE-OUT
IMPORTANT!
– S-Video connection provides
better picture quality. This option
must be available on your TV.

Using S-Video jack

1
Use the S-video cable (not supplied) to
connect the DVD system's S-VIDEO
OUT jack to the S-Video input jack (or
labeled as Y/C or S-VHS) on the TV.
2
To hear the TV channels through this
DVD system, use the audio cables (white/
red) to connect TV IN (L/R) jacks to the
corresponding AUDIO OUT jacks on the
TV.
14
001-046_LX36_17_Eng
COMPONENT
VIDEO IN
S-VIDEO
IN
Pr/Cr
AUDIO
OUT
Pb/Cb
VIDEO IN
Y
1
VIDEO OUT
Y CVBS
NT CENTER FRONT
HT
Pr Pb S-VIDEO
1
2
14
RF coaxial cable to TV
2
Back of RF Modulator
(example only)
INT IN TO TV VIDEO AUDIO IN
IN
R L
CH3 CH4
Antenna or
Cable TV signal
1
AUDIO
L
REAR REAR SUB-
LEFT RIGHT LEFT W
R
SPEAKERS (4 )
TV IN AUX-IN LINE-OUT
IMPORTANT!
– If your TV only has a single
Antenna In jack (or labeled as 75
ohm or RF In,) you will need an RF
modulator in order to view the DVD
playback on the TV. See your
electronics retailer or contact
Philips for details on RF modulator
availability and operations.

Using an accessory RF modulator

Use the composite video cable (yellow)
to connect the DVD system's CVBS jack
to the video input jack on the RF
modulator.
Use the RF coaxial cable (not supplied) to
connect the RF modulator to your TV's
RF jack.
29/08/2003, 2:44 PM
VIDEO OUT
Y CVBS
Pr Pb S-VIDEO
3139 115 22851