Step 4: Setting Language Preference; Setting The Osd Language; Setting The Audio, Subtitle And Disc Menu Language - Philips LX3600 User Manual

Step 4: Setting language
preference
You can select your preferred language
settings so that this DVD system will
automatically switch to the language for
you whenever you load a disc. If the
language selected is not available on the
disc, the disc's default setting language will
be used instead. Except the DVD
system's OSD language, it will remain
once selected.

Setting the OSD Language

1
Stop playback (if any) and press SETUP.
2
Press 2 to select 'General Setup Page'.
3
Press 3 4 to highlight the 'OSD
Language' in the General Setup Page.
4
Enter its submenu by pressing 2.
5
Select a language and press OK.
To remove the menu
Press SETUP.
001-046_LX36_17_Eng
Setting the Audio, Subtitle and Disc
menu language
1
Stop playback (if any) and press SETUP.
2
Press 2 to select 'Preference Page'.
3
Press 3 4 to highlight the following in
the Preference Page.
– 'Audio' (disc's soundtrack)
– 'Subtitle' (disc's subtitles)
– 'Disc Menu' (disc's menu)
4
Enter its submenu by pressing 2.
5
Select a language and press OK.
6
Repeat steps
To remove the menu
Press SETUP.
If you choose OTHERS in Audio,
Subtitle or Disc Menu,
1
Press 3 4 to highlight 'Others'.
2
Press OK and when you are asked to
enter a language code (see 'Language
Code').
3
Input a language code by using the
numeric keypad (0-9).
4
Press OK to confirm.
21
Getting Started
3 5
~ for other settings.
3139 115 22851
29/08/2003, 2:45 PM
21