Invacare® Pegasus Series
If your scooter is fitted with an LCD display, you can either
activate, deactivate or change the volume of the acoustic
signals.
1. Switch off the controls.
2.
Press and hold both direction indicator keys A and B.
3. Switch on the controls.
4. The Buzzer Volume setup page illuminates after two
seconds.
a. Press the indicator keys A or B for the buzzer
selection.
b. Press Lighting key C for decreasing the volume.
c. Press Low speed key D for increasing the volume.
d. Press Setting mode key E for saving and enter the
next setup page.
42
Adjusting backlight (only LCD display)
1.
Press the indicator keys A or B to adjust the backlight
intensity.
2. Press Setting mode key E for saving and enter the next
setup page.
1638629-A