Adjusting The Display - Invacare pegasus pro User Manual

Invacare® Pegasus Series
Switching between modes
1. Press the setting key to switch between the modes,
shown in the display.
Adjusting modes
You can adjust the modes to your requirements.
1.
Press the setting key to choose the mode you want to
adjust.
2.
Press both direction indicator keys for two seconds.
Depending on the mode do one of the following:
a.
ODO mode: Press left indicator key to select
mile>>km>>hour.
b.
TRIP mode: Press both direction indicator keys to
reset last trip.
40
c.
TEMP mode: Press left indicator key to select °C or °F.
d.
TIME mode: Press right indicator key to select hour
or minutes.
Press left indicator key to change time.
3. Wait 15 seconds or press any other key except for the
direction indicator keys, to save the settings.

6.16 Adjusting the display

Activating or deactivating acoustic signals
The scooter controls can be programmed to emit an acoustic
signal in the following situations:
• Using the horn.
• Battery capacity low (activated in delivery status).
• Direction indicators activated (activated in delivery
status).
• Hazard lamps activated (activated in delivery status).
• Reverse gear activated (both reverse gear and acoustic
signal are activated in delivery status).
LED display
1638629-A