Table of Contents
Advertisement
7.1. Bevelling of holes – minimal dimensions
Bevel angle α°
Minimal diameter of the hole in mm
30°
Ø 34mm
37,5°
Ø 28mm
45°
Ø 28mm
50°
Ø 28mm
60°
Ø 27mm
R 2,5mm
Ø 41mm
R 3,5/4mm
Ø 40mm
8. Accessories
Cutter head 30° (including cutting tips, screws, bolt and roller)
Cutter head 37.5° (including cutting tips, screws, bolt and roller)
Cutter head 45° (including cutting tips, screws, bolt and roller)
Cutter head 50° (including cutting tips, screws, bolt and roller)
Cutter head 60° (including cutting tips, screws, bolt and roller)
Coated cutting tips, four-blade for 30°/37.5°/ 45°/50°/ 60 (10 pcs in packing)
Screws for mounting the cutting tips
Cutter head for rounding R 2,5 mm (including cutting tips, screws, bolt and roller)
Cutter head for rounding R 3,5 mm and 4 mm
(including cutting tips, screws, bolt and roller)
Coated cutting tips, four-blade for rounding R 2,5 mm (10 pcs in packing)
Coated cutting tips, four-blade for rounding R 3,5 mm (10 pcs in packing)
Coated cutting tips, four-blade for rounding R 4 mm (10 pcs in packing)
Pneumatic hose, complete, including quick couplings
Filtration and pre-lubrication unit, including regulation
9. Unpacking of the Device
Unpack the machine from the boxboard and check whether everything is all right and whether
the machine is free of any defects. Should you have any questions, contact your distributor.
The machine B15 AIR is supplied together with the necessary tools for operation,
but without the tool and quick coupling for air supply.
The tools, pressure hose and required couplings, filter and regulating unit can be purchased if
needed.
Please refer to the catalogue of N.KO Machines and contact your distributor.
27 223
27 227
27 222
27 224
27 240
27 231
27 241
27 234
27 233
26 109
26 110
26 111
27 229
27 228
7
Advertisement
Table of Contents
