NETGEAR R6120 User Manual page 137

Table 4. Router factory default settings (Continued)
Feature
Firewall and WAN security
Inbound (communications
coming in from the Internet)
Outbound (communications
going out to the Internet)
Source MAC filtering
IGMP proxying
VPN pass-through
SIP ALG
NAT filtering
Main WiFi network
WiFi communication
SSID name
Security
WiFi passphrase
Country/region
RF channel
Transmission speed
Operating mode
Transmit power
Guest WiFi network
WiFi communication
SSID name
AC1200 WiFi Router Model R6120
Default Setting
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Disabled
Disabled
Enabled
Enabled
Secured
Enabled
See the router label.
WPA2-PSK (AES)
See the router label.
North America: United States
Europe: Europe
Other continents: Varies by region
The available channels depend on the region.
Auto
Note that throughput can vary: Network conditions and environmental factors,
including volume of network traffic, building materials and construction, and
network overhead, affect the data throughput rate.
Up to 300 Mbps at 2.4 GHz
Up to 867 Mbps at 5 GHz
100%, nonconfigurable
Disabled
2.4 GHz band: NETGEAR_Guest
5 GHz band: NETGEAR-5G_Guest
Supplemental Information
137