Add A Port Forwarding Rule With A Custom Service Or Application - NETGEAR R6120 User Manual

Add a Port Forwarding Rule With a Custom Service or
Application
The router lists default services and applications that you can use in port forwarding rules. If the service or
application is not predefined, you can add a port forwarding rule with a custom service or application.
To add a port forwarding rule with a custom service or application:
1. Find out which port number or range of numbers the service or application uses.
You can usually find this information by contacting the publisher of the service or application or through
user groups or news groups.
2. Launch a web browser from a computer or mobile device that is connected to the network.
3. Enter http://www.routerlogin.net.
A login window opens.
4. Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > Port Forwarding / Port Triggering.
The Port Forwarding / Port Triggering page displays.
6. Make sure that the Port Forwarding radio button is selected.
7. Click the Add Custom Service button.
The Ports-Custom Services page displays.
8. Specify a new port forwarding rule with a custom service or application as described in the following
table.
Field
Service Name
Service Type
External port range
AC1200 WiFi Router Model R6120
Description
Enter the name of the custom service or application.
Select the protocol (TCP or UDP) that is associated with the service or application.
If you are unsure, select TCP/UDP.
If the service or application uses a single port, enter the port number in the External
port range field.
If the service or application uses a range or ranges of ports, specify the range in the
External port range field. Specify one range by using a dash between the port numbers.
Specify multiple ranges by separating the ranges with commas.
Manage Port Forwarding and Port Triggering
117