Factory Settings - NETGEAR R6120 User Manual

Factory Settings

You can reset the router to the factory default settings that are shown in the following table.
For more information about resetting the router to its factory settings, see
Default Settings on page 103.
The following table shows the factory default settings for the router.
Table 4. Router factory default settings
Feature
Router login
User login URL
User name (case-sensitive)
Default login password
(case-sensitive)
Internet connection
WAN MAC address
WAN MTU size
Port speed
Local network (LAN)
LAN IP address
Subnet mask
DHCP server
DHCP range
DHCP starting IP address
DHCP ending IP address
DMZ
Time zone
Time adjusted for daylight
saving time
AC1200 WiFi Router Model R6120
Default Setting
www.routerlogin.net (or www.routerlogin.com or 192.168.1.1)
admin
password
Use default hardware address.
Determined by the protocol that is used for the Internet connection (see
Manage the MTU Size on page 35)
AutoSensing
192.168.1.1
255.255.255.0
Enabled
192.168.1.2 to 192.168.1.254
192.168.1.2
192.168.1.254
Disabled
North America: Pacific Standard Time
Europe: GMT
Other continents: Varies by region
Disabled
Supplemental Information
Return the Router to Its Factory
136