Installing the Battery Pack:
1. First, make sure the player is in "Stop" mode and that the AC power
2. Close the player cover.
3. Align the guide pins on the battery with the holes on the back of the
Removing the Battery Pack:
1. First, make sure the player is in "Stop" mode and the AC power supply
2. Press the release button on the left side of battery.
3. Pull the battery from the unit.
PDF created with FinePrint pdfFactory Pro trial version
2.Recharge efficiency will degrade when environmental temperatures
drop below 50
o
F (10
3. Please remove the battery from the player and store it properly if
the player is not to be used for long time. During this period , please
recharge the battery at least once every two months to maintain
the battery in optimum codition.
supply has been disconnected.
unit. Then push the battery towards the rear of the player until it locks
into position. The lock position is indicated by a click. The battery will
fit snugly to the player.
Figure 7. Installing the DVD Player Battery
has been disconnected.
PRESS
Figure 8. Removing the DVD Player Battery
o
C) or exceed 95
o
F (35
36
http://www.fineprint.com
o
C).