Table of Contents
Advertisement
Anti-Tip Brackets
Unit may tip forward if loaded racks/shelves are all pulled out at the same time. To prevent
tipping and provide a stable installation, the unit must be secured in place with the anti-tip
brackets provided with the unit. A set of metal anti-tip brackets are supplied with the unit.
The anti-tip brackets, when properly installed should secure the rear legs and prevent the
unit from tipping forward.
Some installation sites may require modification to provide a secure surface for attaching the
brackets. Refer to the illustrations below for mounting bracket locations.
IMPORTANT: If installing on a concrete floor, concrete fasteners are required and not included
with the anti-tip kit.
13-1/2"
(34.3 cm)
15/16"
(2.4 cm)
3/16"
(0.5 cm)
FRONT OF UNIT
WARNING
Anti-tip
Bracket
ø 3/8"
(1.0 cm)
15/16"
(2.4 cm)
3/16"
(0.5 cm)
11
22-1/32"
(56.0 cm)
FRONT OF UNIT
Advertisement
Table of Contents
