Viking Range VCSB423 Installation Instructions Manual

Viking Range VCSB423 Installation Instructions Manual

Built-in

Advertisement

INSTALLATION
INSTRUCTIONS
BUILT-IN SIDE-BY-SIDE REFRIGERATOR/FREEZER
Retain for Future Reference
IMPORTANT - PLEASE READ AND FOLLOW
Make sure that incoming voltage is the same as unit rating. An electric rating plate specifying voltage, frequency, wattage,
amperage, and phase is attached to the product.
To reduce the risk of fire, electric shock, or injury to persons, installation work and electrical wiring must be done by qualified
people in accordance with all applicable codes and standards, including fire-rated construction.
The installer should leave these instructions with the consumer who should retain them for local inspector's use and for
future reference.

GENERAL INFORMATION

Y Y o o u u r r s s a a f f e e t t y y a a n n d d t t h h e e s s a a f f e e t t y y o o f f o o t t h h e e r r s s
i i s s v v e e r r y y i i m m p p o o r r t t a a n n t t . .
We have provided many important safety
messages in this manual and on your
appliance. Always read and obey all
safety messages.
This is the safety alert symbol. This
symbol alerts you to hazards that
can kill or hurt you and others.
All safety messages will be
preceded by the safety alert
symbol and the word "DANGER" or
"WARNING". These words mean:
DANGER
Y Y o o u u w w i i l l l l b b e e k k i i l l l l e e d d o o r r s s e e r r i i o o u u s s l l y y i i n n j j u u r r e e d d i i f f y y o o u u
d d o o n n ' ' t t f f o o l l l l o o w w i i n n s s t t r r u u c c t t i i o o n n s s . .
WARNING
Y Y o o u u c c a a n n b b e e k k i i l l l l e e d d o o r r s s e e r r i i o o u u s s l l y y i i n n j j u u r r e e d d i i f f
y y o o u u d d o o n n ' ' t t f f o o l l l l o o w w i i n n s s t t r r u u c c t t i i o o n n s s . .
All safety messages will identify the
hazard, tell you how to reduce the chance
if injury, and tell you what can happen if
the instructions are not followed.
WARNING
T T I I P P O O V V E E R R H H A A Z Z A A R R D D
R R e e f f r r i i g g e e r r a a t t o o r r i i s s t t o o p p h h e e a a v v y y a a n n d d t t i i p p s s e e a a s s i i l l y y
w w h h e e n n n n o o t t c c o o m m p p l l e e t t e e l l y y i i n n s s t t a a l l l l e e d d . .
K K e e e e p p d d o o o o r r s s c c l l o o s s e e d d u u n n t t i i l l r r e e f f r r i i g g e e r r a a t t o o r r i i s s
c c o o m m p p l l e e t t e e l l y y i i n n s s t t a a l l l l e e d d a a n n d d s s e e c c u u r r e e d d p p e e r r
i i n n s s t t a a l l l l a a t t i i o o n n i i n n s s t t r r u u c c t t i i o o n n s s . .
U U s s e e t t w w o o o o r r m m o o r r e e p p e e o o p p l l e e t t o o m m o o v v e e a a n n d d
i i n n s s t t a a l l l l r r e e f f r r i i g g e e r r a a t t o o r r . . F F a a i i l l u u r r e e t t o o d d o o s s o o c c a a n n
r r e e s s u u l l t t i i n n d d e e a a t t h h o o r r s s e e r r i i o o u u s s i i n n j j u u r r y y . .
It is your responsibility to :
-comply with installation specifications and dimensions
-properly install refrigerator
-remove any moldings or decorative panels that prevent the refrigerator
from being serviced
-make sure that you have these materials (not provided with your
refrigerator), which are necessary for proper installation:
1/4" (6 mm) copper tubing with shutoff valve
6 - #8 x 3" (7.6 cm) wood screws (Longer screws may be required.)
1 - Saddle valve (Do not use self-piercing feature of the valve)
-assure that floor will support refrigerator, door panels and contents
(approximately 1200 pounds [540 kg])
-provide a properly grounded electrical outlet
-assure that location will permit appliance doors to open 90
VIKING RANGE CORPORATION
111 Front Street
Greenwood, Mississippi 38930 USA
(662) 455-1200
M M o o s s t t o o f f t t h h e e r r e e f f r r i i g g e e r r a a t t o o r r ' ' s s
w w e e i i g g h h t t i i s s a a t t t t h h e e t t o o p p . . E E x x t t r r a a c c a a r r e e
i i s s n n e e e e d d e e d d w w h h e e n n m m o o v v i i n n g g t t h h e e
r r e e f f r r i i g g e e r r a a t t o o r r t t o o p p r r e e v v e e n n t t t t i i p p p p i i n n g g . .
U U s s e e c c a a r r d d b b o o a a r r d d s s h h i i p p p p i i n n g g
m m a a t t e e r r i i a a l l o o r r p p l l y y w w o o o o d d u u n n d d e e r r
r r e e f f r r i i g g e e r r a a t t o o r r u u n n t t i i l l i i t t i i s s i i n n s s t t a a l l l l e e d d i i n n
t t h h e e o o p p e e r r a a t t i i n n g g p p o o s s i i t t i i o o n n t t o o
p p r r o o t t e e c c t t f f l l o o o o r r s s u u r r f f a a c c e e . .
minimum
o

Advertisement

Table of Contents
loading

Summary of Contents for Viking Range VCSB423

  • Page 1: General Information

    INSTALLATION VIKING RANGE CORPORATION 111 Front Street Greenwood, Mississippi 38930 USA INSTRUCTIONS (662) 455-1200 BUILT-IN SIDE-BY-SIDE REFRIGERATOR/FREEZER Retain for Future Reference IMPORTANT - PLEASE READ AND FOLLOW Make sure that incoming voltage is the same as unit rating. An electric rating plate specifying voltage, frequency, wattage, amperage, and phase is attached to the product.
  • Page 2 BASIC SPECIFICATIONS AND DIMENSIONS - PROFESSIONAL MODELS 42” W. MODELS D D E E S S C C R R I I P P T T I I O O N N V V C C S S B B 4 4 2 2 3 3 V V C C S S B B 4 4 2 2 3 3 D D Overall Width 42”...
  • Page 3 BASIC SPECIFICATIONS AND DIMENSIONS - DESIGNER MODELS 42” W. MODELS D D E E S S C C R R I I P P T T I I O O N N D D D D S S B B 4 4 2 2 3 3 D D D D S S B B 4 4 2 2 3 3 D D Overall Width 42”...
  • Page 4 BASIC SPECIFICATIONS AND DIMENSIONS - FULL OVERLAY MODELS 42” W. MODELS D D E E S S C C R R I I P P T T I I O O N N D D F F S S B B 4 4 2 2 3 3 D D F F S S B B 4 4 2 2 3 3 D D Overall Width 42”...
  • Page 5: Features Of Your Refrigerator

    FEATURES OF YOUR REFRIGERATOR (NON-DISPENSER MODEL) 1. Electronic controls 8. Non-adjusting freezer shelf (1) 2. Dairy compartments (2) 9. Ice bucket (1) 3. Adjustable door bins (4) 10. Glide-out freezer baskets (2) 4. Meat Savor TM /Produce Drawer (1) 11. Adjustable freezer shelves (3) 12.
  • Page 6 FEATURES OF YOUR REFRIGERATOR (ICE AND WATER DISPENSER MODEL) 1. Electronic controls 8. Spillproof shelves (5) 2. Dairy compartments (2) 9. Adjustable freezer shelves (3) 3. Adjustable door bins (4) 10. Non-adjusting freezer shelf (1) 4. Meat Savor TM /Produce Drawer (1) 11.
  • Page 7 SITE PREPARATIONS AND CONSIDERATIONS PROFESSIONAL MODEL SIDE-BY-SIDE CABINET OPENING DIMENSIONS ( ( 2 2 ) ) 2 2 ” ” x x 4 4 ” ” M M o o u u n n t t i i n n g g b b o o a a r r d d ( ( 1 1 1 1 / / 2 2 ”...
  • Page 8 SITE PREPARATIONS AND CONSIDERATIONS DESIGNER/FULL OVERLAY MODEL SIDE-BY-SIDE CABINET OPENING DIMENSIONS ( ( 1 1 ) ) 2 2 ” ” x x 4 4 ” ” M M o o u u n n t t i i n n g g b b o o a a r r d d ( ( 1 1 1 1 / / 2 2 ” ” ( ( 3 3 . . 8 8 c c m m ) ) x x 3 3 1 1 / / 2 2 ” ” ( ( 8 8 . . 9 9 c c m m ) ) N N o o t t e e : : I I f f u u n n i i t t i i s s i i n n s s t t a a l l l l e e d d d d e e e e p p e e r r t t h h a a n n 2 2 4 4 ”...
  • Page 9: Water Supply Requirements

    WATER SUPPLY REQUIREMENTS U U s s e e o o n n l l y y 1 1 / / 4 4 ” ” ( ( 6 6 m m m m ) ) c c o o p p p p e e r r t t u u b b i i n n g g f f o o r r w w a a t t e e r r l l i i n n e e . . D D o o WARNING N N o o t t i i n n s s t t a a l l l l c c o o p p p p e e r r t t u u b b i i n n g g i i n n a a r r e e a a w w h h e e r r e e t t e e m m p p e e r r a a t t u u r r e e s s E E L L E E C C T T R R I I C C A A L L S S H H O O C C K K H H A A Z Z A A R R D D...
  • Page 10 Plumbing Dimensions * * N N O O T T E E : : M M u u s s t t b b e e u u n n d d e e r r 1 1 ” ” ( ( 2 2 . . 5 5 c c m m ) ) f f r r o o m m b b a a c c k k w w a a l l l l *1”...
  • Page 11: Area Requirements

    AREA REQUIREMENTS V V e e r r i i f f y y t t h h e e f f o o l l l l o o w w i i n n g g : : •Refrigerator can fit into residence and can be moved around corners and through doorways.
  • Page 12 DOOR SWING AND TIPPING CONSIDERATIONS 42” W. PROFESSIONAL MODEL 42” (106.7 cm) 10-19/32” 12-21/32” (26.3 cm) (32.1 cm) 41” (104,1 cm) 8-1/8” 9-1/16” (20.6 cm) (24.6 cm) 24-23/32” 41-5/16” 3” 3” (62.8 cm) (104.9 cm) (7.6 cm) 45-31/32” (7.6 cm) (116.8 cm) 40-19/32”...
  • Page 13 DOOR SWING AND TIPPING CONSIDERATIONS 48” W. PROFESSIONAL MODEL 48” (121.9 cm) 10-19/32” 15-13/32” (26.3 cm) (39.1 cm) 47” (119.4 cm) 11-9/16” 8-1/8” (29.4 cm) (20.6 cm) 24-23/32” 41-27/32” 2-31/32” 2-31/32” (62.8 cm) (106.3 cm) (7.5 cm) 51-7/16” (7.5 cm) (130.7 cm) 41-1/8”...
  • Page 14 DOOR SWING - 42" W. DESIGNER MODEL 42” (106.7 cm) 41” (104.1 cm) 9-1/2” 11/27-32” (24.1 cm) (30.1 cm) 24” 7-5/32” 8-3/4” (61.0 cm) (18.2 cm) (22.2 cm) 43-1/2” 1-27/32” 1-27/32” 39-15/32” (110.5 cm) (4.7 cm) (4.7 cm) (100.3 cm) 44-31/32”...
  • Page 15 DOOR SWING - 48" W. DESIGNER MODEL 9-13/16” (25.0 cm) 7-3/8” (18.7 cm) 1-27/32” (4.7 cm) 24-3/32” (61.2 cm) DOOR SWING - 48" W. FULL OVERLAY MODEL...
  • Page 16 TIPPING CONSIDERATIONS 42” W. DESIGNER AND FULL OVERLAY MODELS TIPPING CONSIDERATIONS 48” W. DESIGNER AND FULL OVERLAY MODELS...
  • Page 17 SIDE-BY-SIDE REFRIGERATOR OVERALL DIMENSIONS PROFESSIONAL MODEL T T O O P P 9/32” (0.7 cm) 22 3/16” (56.4 cm) 24 3/4” (62.9 cm) 5/16” (0.8 cm) D D O O O O R R 5/16” Side Trim (0.8 cm) 1 1/2” S S I I D D E E (3.8 cm) F F R R O O N N T T...
  • Page 18 CABINET INFORMATION - PROFESSIONAL MODELS Professional models fit “semi-flush” in standard 24” (61.0 cm) deep cabinet openings. The door face protrudes 2-1/2” (6.4 cm) from the cabinet face. The handle protrudes an additional 2-1/2” (6.7 cm) into the room 42" W 41-1/2"...
  • Page 19 CUSTOM SIDE PANEL DIMENSIONS - PROFESSIONAL MODELS FOR 3/4" (1.9 cm) SIDE PANELS 6” (15.2 cm) 82-7/8” (210.5 cm) TO 84-1/16” (213.5 cm) DEPENDING ON HOW HIGH LEVELING FEET ARE RAISED AND CABINET ENCLOSURE HEIGHT OPTIONAL KICKPLATE OPTIONAL KICKPLATE NOTCH - DIMENSIONS NOTCH - DIMENSIONS DETERMINED BY CABINETS DETERMINED BY CABINETS...
  • Page 20 SIDE-BY-SIDE REFRIGERATOR OVERALL DIMENSIONS - DESIGNER MODELS T T O O P P D D O O O O R R S S I I D D E E F F R R O O N N T T 8 8 2 2 - - 7 7 / / 8 8 " " ( ( 2 2 1 1 0 0 .
  • Page 21 CABINET AND PANEL INFORMATION - DESIGNER MODELS Designer models fit flush in standard 24” (61.0 cm) deep cabinet openings with no protrusion into the room except 2” (5.1 cm) curved handle depth DETAIL A-A DETAIL B-B WITH ADJACENT CABINETS; OVERLAPPING CABINET DOORS DETAIL A-A DETAIL B-B WITH ADJACENT CABINETS;...
  • Page 22 SIDE-BY-SIDE REFRIGERATOR OVERALL DIMENSIONS - FULL OVERLAY MODELS T T O O P P S S I I D D E E F F R R O O N N T T 8 8 2 2 - - 7 7 / / 8 8 " " ( ( 2 2 1 1 0 0 .
  • Page 23 CABINET AND PANEL INFORMATION - FULL OVERLAY MODELS Full overlay models, (with 3/4” [1.9 cm], thick panels and custom handles locally supplied), fit flush in 25” (63.5 cm) deep (countertop depth) cabinet openings with no protrusion into room except custom handles A A - - A A B B - - B B D D E E T T A A I I L L B B - - B B...
  • Page 24 CABINET AND PANEL INFORMATION - FULL OVERLAY MODELS (CONTINUED) Full overlay models can be installed in standard 24” (61.0 cm) deep openings. However, the door faces and top ventilation grille will protrude 3/4” (1.9 cm) into the room. This is ideal for alignment with full overlay cabinet doors. C C - - C C D D E E T T A A I I L L C C - - C C...
  • Page 25 CUSTOM DOOR PANEL DIMENSIONS - FULL OVERLAY MODELS 42” W. MODELS Non-Dispenser Model 3 3 / / 4 4 ” ” ( ( 1 1 . . 9 9 c c m m ) ) F F u u l l l l O O v v e e r r l l a a y y P P a a n n e e l l 1 1 / / 4 4 "...
  • Page 26 CUSTOM DOOR PANEL DIMENSIONS - FULL OVERLAY MODELS 48” W. MODELS Non-Dispenser Models 3 3 / / 4 4 ” ” ( ( 1 1 . . 9 9 c c m m ) ) F F u u l l l l O O v v e e r r l l a a y y P P a a n n e e l l 1 1 / / 4 4 "...
  • Page 27 ICE AND WATER DISPENSER BEZEL REMOVAL AND INSTALLATION FULL OVERLAY MODELS To Remove: 1. Remove packaging material surrounding bezel. 2. Grasping the sliding lever, pull away from bezel. 3. Remove spill tray from lower part of bezel exposing two screws. 4.
  • Page 28 “Z” BRACKET INSTALLATION - FULL OVERLAY MODELS DOOR DOOR N N o o n n - - D D i i s s p p e e n n s s e e r r M M o o d d e e l l D D i i s s p p e e n n s s e e r r M M o o d d e e l l...
  • Page 29: Custom Side Panel Dimensions

    CUSTOM SIDE PANEL DIMENSIONS DESIGNER/FULL OVERLAY MODELS F F O O R R 3 3 / / 4 4 ” ” ( ( 1 1 . . 9 9 c c m m ) ) S S I I D D E E P P A A N N E E L L S S N N O O T T E E : : A A d d d d i i n n g g a a 3 3 / / 4 4 ”...
  • Page 30 CUSTOM FINISHING OPTIONS Door Clearances All installations must allow for the refrigerator and freezer door to open a minimum of 90 •For side wall or corner installation, allow for a standard 3” (7.6 cm) cabinet filler to assure doors open to 90 .
  • Page 31 OPTIONAL CUSTOM AIR GRILLE DIMENSIONS F F R R O O N N T T V V I I E E W W 3 3/4” (9.5 cm) 3” (7.6 cm) 1 1/2” (3.8 cm) 3/4” (1.9 cm) TYP Min. Air Opening 42”...
  • Page 32 REAR VIEW DIMENSIONS 3/8” (0.95 cm) 1/2” (1.3 cm) 42” SXS 26 3/16” 24 27/32” 5 17/32” 4 11/64” (66.5 cm) (63.1 cm) (14.1 cm) (10.6 cm) 48” SXS 32 3/16” 30 27/32” 11 17/32” 10 11/64” (81.8 cm) (78.3 cm) (29.3 cm) (25.8 cm) 42”...
  • Page 33: Insert Dimensions

    HINGE COVER DIMENSIONS Top View 1/2” (1.3 cm) 3 1/8” (7.9 cm) 1 3/8” (3.5 cm) 2 1/8” Front View (5.4 cm) 3 5/8” (9.2 cm) 3/8” (0.95 cm) R3/8” 42” SXS 41 1/2” (105.4 cm) N N O O T T E E : : Adding 3/8” (0.9 cm) radii is 48”...
  • Page 34: Refrigerator Installation

    REFRIGERATOR INSTALLATION T T I I P P O O V V E E R R H H A A Z Z A A R R D D R R e e f f r r i i g g e e r r a a t t o o r r i i s s t t o o p p h h e e a a v v y y a a n n d d t t i i p p s s e e a a s s i i l l y y w w h h e e n n n n o o t t c c o o m m p p l l e e t t e e l l y y i i n n s s t t a a l l l l e e d d .
  • Page 35 E E l l e e c c t t r r i i c c a a l l S S h h o o c c k k H H a a z z a a r r d d D D i i s s c c o o n n n n e e c c t t p p o o w w e e r r a a t t b b r r e e a a k k e e r r o o r r t t u u r r n n p p o o w w e e r r d d i i s s c c o o n n n n e e c c t t s s w w i i t t c c h h t t o o O O F F F F p p o o s s i i t t i i o o n n b b e e f f o o r r e e p p e e r r f f o o r r m m i i n n g g a a n n y y i i n n s s t t a a l l l l a a t t i i o o n n p p r r o o c c e e d d u u r r e e .
  • Page 36 Before moving the refrigerator in place, confirm the finished dimensions, electrical location, minimum door and shelf clearances, and door panel instructions. (See pages 7 & 8). 1. Position refrigerator in front of cutout. 2. Verify operation by plugging power cord in receptacle. P P o o w w e e r r s s w w i i t t c c h h w w i i l l l l b b e e s s h h i i p p p p e e d d i i n n t t h h e e “ “ O O N N ” ” p p o o s s i i t t i i o o n n a a n n d d s s h h o o w w r r o o o o m m s s w w i i t t c c h h w w i i l l l l b b e e i i n n t t h h e e “...
  • Page 37: Water Connection

    WATER CONNECTION •Refer to water supply requirement section for preliminary installation and site preparation (see page 9 & 10). • • D D o o n n o o t t u u s s e e p p l l a a s s t t i i c c w w a a t t e e r r l l i i n n e e s s b b e e t t w w e e e e n n r r e e f f r r i i g g e e r r a a t t o o r r a a n n d d s s u u p p p p l l y y . . P P l l a a s s t t i i c c w w a a t t e e r r l l i i n n e e s s c c a a n n f f a a i i l l d d u u e e t t o o f f a a t t i i g g u u e e o o v v e e r r t t i i m m e e a a n n d d c c a a u u s s e e e e x x t t e e n n s s i i v v e e d d a a m m a a g g e e t t o o p p r r o o d d u u c c t t a a n n d d t t h h e e h h o o m m e e .
  • Page 38 WATER CONNECTION (ICE AND WATER DISPENSER MODEL) •Refer to water supply requirement section for preliminary installation and site preparation (see page 9 & 10). •Do not use plastic water lines between refrigerator and supply . If moved repeatedly, plastic water lines can fail due to fatigue over time and cause extensive damage to product and the home.
  • Page 39: Water Filter Installation

    H H O O W W T T O O O O R R D D E E R R R R E E P P L L A A C C E E M M E E N N T T F F I I L L T T E E R R C C A A R R T T R R I I D D G G E E S S Replacement filters are available through your local Viking Range dealer. You may also order them by calling Viking...
  • Page 40 S S Y Y S S T T E E M M S S P P E E C C I I F F I I C C A A T T I I O O N N A A N N D D P P E E R R F F O O R R M M A A N N C C E E D D A A T T A A S S H H E E E E T T This system has been tested according to NSF/ANSI 42/53 for reduction of the substances listed below.
  • Page 41: Kickplate Installation

    KICKPLATE INSTALLATION Align the holes on both ends of the louvered panel with the holes in the base of the refrigerator. Adjust the kickplate to the desired height and fasten in place by tightening the screws in the slot. Attach the kickplate to the refrigerator on each side with the two black phillips head screws provided.
  • Page 42: Wiring Diagram

    WIRING DIAGRAM BUILT-IN SIDE-BY-SIDE 42” / 48” W. REFRIGERATOR - NON-DISPENSER MODEL W W A A R R N N I I N N G G : : E E L L E E C C T T R R I I C C A A L L G G R R O O U U N N D D I I N N G G I I N N S S T T R R U U C C T T I I O O N N S S This appliance is...
  • Page 43 WIRING DIAGRAM BUILT-IN SIDE-BY-SIDE 48” W. REFRIGERATOR - DISPENSER MODEL W W A A R R N N I I N N G G : : E E L L E E C C T T R R I I C C A A L L G G R R O O U U N N D D I I N N G G I I N N S S T T R R U U C C T T I I O O N N S S This appliance is...
  • Page 44 W W I I T T H H T T H H I I S S U U N N I I T T . . VIKING RANGE CORPORATION 111 Front Street • Greenwood, Mississippi 38930 USA • (662) 455-1200 Specifications subject to change without notice For more product information, call 1-888-VIKING1 (845-4644), or visit our web site at http://www.vikingrange.com...
  • Page 45 Addendum for DTSB483 Trim Models Only...
  • Page 47 CABINET AND PANEL INFORMATION-48" W. DESIGNER TRIM MODELS Trim models with 1/4” (.6 cm) panels (not included) fit flush in standard 24” (61.0 cm) deep cabinet openings. The extruded handles protrude 1” (2.5 cm) into the room. DETAIL “A” DETAIL “B” 48”...
  • Page 48 CABINET AND PANEL INFORMATION-48" W. DESIGNER TRIM MODELS (continued) 48” (121.9cm) WALL NO SPACE 24 3/4” 24” (61.0 cm) (62.9 cm) STANDARD CABINET DEPTH REFRIGERATOR DOOR 1” (2.5 cm) 1/4” (0.6 cm) PANEL RAISED PANEL 2 7/8” WITH ATTACHED 3/4” CABINET DOOR (7.3 cm) (1.9 cm) RAISED PANEL...
  • Page 50 DOOR PANEL INSTALLATION-48" W. DESIGNER TRIM MODELS Panels must not weigh more than 50 pounds per door. Refer to “Custom Panel Dimensions” on page 4 for detailed panel instructions. 1. Remove cabinet side trim with a phillips screwdriver 2. Remove handle with a phillips screwdriver. •For ease of panel installation, 2 people are required to lift and guide panel into trim.
  • Page 51 BASIC SPECIFICATIONS AND DIMENSIONS-48” W. DESIGNER TRIM MODELS DESCRIPTION DTSB483 Overall Width 48” (121.9 cm) Overall Height from Bottom Min. 82-3/4” (210.2 cm) to Max. 84-1/16” (213.5 cm) Overall Depth from Rear To rear edge of side trim 23 13/16” (60.5 cm) To front of top grille 24”...

Table of Contents