Driving Mirrors; Rear Handlebar Cover - PIAGGIO Liberty 50 4tempi 2008 Workshop Manual

Chassis

Driving mirrors

• With the set screw fully tightened, screw the mir-
ror stem on the handlebar until it stops. • Loosen
the mirror and set it in the desired position. • Loos-
en the set screw until the stem is locked.
Locking torques (N*m)
Mirror set screw
24 to 26

Rear handlebar cover

• Remove the front handlebar cover
• Unscrew the odometer transmission joint and
slide it off
• Disconnect the instrument panel and electrical
controls connections
• Cut the clamp retaining the front brake pipes to
the instrument panel
• Remove the screw fixing the instrument panel to
the handlebar
See also
Front handlebar cover
CHAS - 144
Liberty 50 4tempi