Table of Contents
Advertisement
Maintenance
AGIP GEAR SAE 80W-90 Lubricant for gear-
boxes and transmissions.
API GL-4
Replacement
Remove the oil filler cap/dipstick "A".
- Unscrew the oil drainage plug "B" shown in the
figure and drain out all the oil.
- Screw the drainage plug back and fill up the hub
with the required oil (about 100 cm³)
Air filter
- Remove the left-hand lower side band.
- Remove the cleaner cap after unscrewing the 7
fixing screws, and then pull out the filter element.
Cleaning:
- Wash in mild soap and water.
- Dry with a clean cloth without wringing and with
compressed air.
- Soak with a 50% fuel-oil mixture with selenia air
filter oil.
- Let the filter cartridge drip and then squeeze it
between the hands without wringing.
- Refit all components by following the reverse
procedure to the removal.
CAUTION
IF THE VEHICLE IS MOSTLY USED ON DUSTY ROADS,
THE AIR FILTER NEEDS TO BE CLEANED AT SHORTER
INTERVALS THAN INDICATED IN THE SCHEDULED MAIN-
TENANCE TABLE.
DO NOT RUN THE ENGINE WITH THE AIR FILTER DISAS-
SEMBLED OR EXCESS WEAR OF CYLINDER AND PISTON
WILL RESULT.
Recommended products
AGIP FILTER OIL Special product for the treat-
ment of foam filters.
-
MAIN - 30
Liberty 50 4tempi
Advertisement
Table of Contents
