Technical Data; Cleaning And Maintenance - Neilsen CT2818 Original Instruction

11. FLEXYDRIVE ASSEMBLY
Remove the front ring nut from the tool by turning in an anti-clockwise
direction. Partially unscrew the blocking ring nut from the spindle . Partially
extract the internal transmission cable from the flexydrive. Insert the flexydrive
transmission cable into the spindle of the tool pushing it in as far as possible.
Keep the spindle block button pressed in and screw the spindle blocking ring
nut turning it in a clockwise direction. Tighten using the spanner for this
purpose. Screw the threaded end of the flexydrive onto the body of the tool
and tighten, screwing in a clockwise direction

12. TECHNICAL DATA

Voltage / frequency
Power input
No load speed
Collet size
Protection class

13. CLEANING AND MAINTENANCE

Attention !Before performing any work on the equipment, pull
the power plug.
8.1 Cleaning

Keep the ventilation slots of the machine clean to prevent overheating
of the

Regularly clean the machine housing with a soft cloth, preferably after
each

Keep the ventilation slots free from dust and dirt.

If the dirt does not come off use a soft cloth moistened with soapy
water.
Never use solvents such as petrol, alcohol, ammonia water,
etc. These solvents may damage the plastic parts.
230V/50Hz
135W
10000-32000/min
3,2mm
II