Advertisement
OPERATING
1. Open cap and fill with abrasives
2. Attach supplied hose to sand container and gun
3. Attach compressor hose to inlet nipple on gun
4. Affix shoulder harness
5. Wear proper gloves and safety glasses
6. Set compressor to 90-125 psi
7. Spray desired area with gun
FEATURES AND TECHNICAL DATA
Minimum compressor requirement: 3 HP, 90 PSI
●
Operating pressure: 125 PSI
●
45'' rubber hose
●
2.5 gallon capacity
●
Heavy duty sandblast gun nozzle
●
Seamless polyethylene hopper
●
This high-quality air sandblater kit works with glass beads, sand and
●
aluminium oxide.
It is ideal for hobbyist or professional users to remove rusts, old paints, dirt,
●
burrs from almost any surface, such as brick stone or walls, metals, on
cars, especially car wheels.
5
Advertisement
