Quanmax QDSP-2090 Series User Manual page 38

Chapter 3
Save Changes and Exit
Exit system setup after saving the changes. Once you are finished making
your selections, choose this option from the Exit menu to ensure the values
you selected are saved to the CMOS R AM. The CMOS R AM is sustained by
an onboard backup battery and stays on even when the PC is turned off. When
you select this option, a confirmation window appears. Select [Yes] to save
changes and exit.
Discard Changes and Exit
Exit system setup without saving any changes. Select this option only if you do
not want to save the changes that you made to the Setup program. If you
made changes to fields other than system date, system time, and password,
the BIOS asks for a confirmation before exiting.
Discard Changes
Discards changes done so far to any of the setup values. This option allows
you to discard the selections you made and restore the previously saved
values. After selecting this option, a confirmation appears. Select [Yes] to
discard any changes and load the previously saved values.
Load Optimal Defaults
Load Optimal Default values for all the setup values. This option allows you to
load optimal default values for each of the parameters on the Setup menus,
which will provide the best performance settings for your system. The F9 key
can be used for this operation.
Load Failsafe Defaults
Load Optimal Default values for all the setup values. This option allows you to
load failsafe default values for each of the parameters on the Setup menus,
which will provide the most stable performance settings. The F8 key can be
used for this operation.
QDSP-2090 Series User's Manual