Check Vibra Function Using "Vibra Control - Nokia RH-64 Service Manual

RH-64
Nokia Customer Care Baseband troubleshooting
Figure 97 Checking IHF and ring tone by using "Buzzer"

Check vibra function using "Vibra control"

Steps
1. Connect phone with Phoenix.
2. Open "Vibra control" window from "Testing -> Vibra control", as shown in the figure below.
3. Select suitable intensity value, for example 53 %.
4. Select "Vibra state" as "Enabled"
5. Click "Write".
6. Check if Vibra works.
Figure 98 Checking vibra function by using vibra control
Page 6–20 Company Confidential 9243363 (Issue 1)
Copyright ©2005 Nokia. All Rights Reserved.