RH-64
System module
External audio connector
The system connector, containing a 4-pole Jack plug, gains the access to the external audio interface. The Jack
plug, which is integrated in the system connector, contains a mechanical switch, which is used to detect the
connection of the accessories. The configuration for the 4-pole Jack-plug is shown in the following figure.
Line symbol
XMICP
XMICN
XEARP
XEARN
INT
GND
External signals and connections
Signal
From
XMICP
HS/HF Mic
XMICN
9243363 (Issue 1)
Figure 147 4-pole jack plug for audio accessory
Table 13 Connector for External Audio Accessories
Table 14 System connector
To
Min
Nom
UEMC
2/60mV
Lite
diff
2/60mV
diff
Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
Function
External microphone signal input
External microphone signal input
External earphone signal output
External earphone signal output
Accessory detection
Ground (Only used by PPH-1)
Max
Condi-tion
Analog
audio in
DC bias
2V2kohm
Ana in / 1k to
GND
Nokia Customer Care
Note
Headset Mic bias and audio
signal 2mV nominal. HF Mic
signal 60mV nominal.
Differential symmetric
input.
Accessory detection by
bias loading
Hook interrupt by heavy
bias loading
Page 8–11