Installing Phoenix Data Package - Nokia RH-64 Service Manual

Nokia Customer Care

Installing Phoenix data package

Before you begin
1 Verify that The data package contains all product-specific data to make the Phoenix Service Software and
tools usable with a certain phone model.
2 Check that the dongle is attached to the parallel port of your computer.
3 Install Phoenix Service SW.
4 Download the installation package (for example, RM-51_dp_EA_v_1_0.exe) to your computer (for example, in
C:\TEMP).
5 Close all other programs.
6 Run the application file (for example, RM-51_dp_EA_ v_1_0.exe) and follow the instructions on the screen.
If you already have the Phoenix Service SW installed on your computer, you will need to update it when a new
version is released.
Note: Very often the Phoenix Service SW and the phone-specific data package for Phoenix come in
pairs, meaning that a certain version of Phoenix can only be used with a certain version of the data
package. Always use the latest available versions of both. Instructions can be found in phone model
specific Technical Bulletins and readme.txt files of the data packages.
Steps
1. To start installation, run the application file (for example, RM-51_dp_EA_ v_1_0.exe).
2. Click Next, and wait for the installation files to be extracted.
Page 3–16
Figure 24 Extracting files
Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
RH-64
Phoenix service software
9243363 (Issue 1)