Siemens KG39FSB45 Instructions For Use Manual page 15

Note
Press both buttons at exactly the
same time.Button operation is locked
if only the lock/alarm off button is
pressed for a longer period. Press the
lock/alarm off button again until the
lock is deactivated.
2. Press the compartment button
repeatedly until the display shows SI.
In the second display, a value appears
between 0 (no reception) and 3 (full
reception).
Note
The signal strength should be at least
2. If the signal strength is too low, the
connection could be interrupted. Place
the router and the refrigerator closer
together, ensure that the connection is
not disturbed by shielding walls or
install a repeater to strengthen the
signal.
Resetting Home Connect settings
If the connection process does not work
or you would like to log the refrigerator
on to a different home network (WLAN),
you can reset the Home Connect
settings:
1. Press the super cooling button and
the lock/alarm off button
simultaneously to open the Home
Connect menu.
The display shows Cn.
Note
Press both buttons at exactly the
same time.Button operation is locked
if only the lock/alarm off button is
pressed for a longer period. Press the
lock/alarm off button again until the
lock is deactivated.
2. Press the compartment button
repeatedly until the displays rE and oF
are shown.
3. Press the + button.
The display shows a short
■
animation and then again oF.
The Home Connect settings have
been reset.
If the display shows Er, start the
■
reset again or call customer
service.
Information on data protection
When your Home Connect refrigerator is
connected for the first time to a WLAN
network that is connected to the Internet,
your refrigerator transmits the following
categories of data to the Home Connect
server (initial registration):
Unique appliance identification
■
(consisting of appliance codes as well
as the MAC address of the installed
Wi-Fi communication module).
Security certificate of the Wi-Fi
■
communication module (to ensure a
secure IT connection).
The current software and hardware
■
version of your refrigerator.
Status of any possible previous
■
resetting to factory settings.
This initial registration prepares the
Home Connect functions for use and is
required only when you want to use
Home Connect for the first time.
Note
Please note that the Home Connect
functions can only be utilized with the
Home Connect app. You can call up
information on data protection in the
Home Connect app.
en
15