Siemens KG39FSB45 Instructions For Use Manual page 14

en
8. As soon as the refrigerator has been
found, enter the network name (SSID)
and the password (Key) of your own
home network (WLAN) into the
corresponding fields.
9. Confirm with the button Transmit to
domestic appliances.
If the connection is successful, on
■
flashes in the refrigerator display.
You can now connect the
refrigerator with the app.
If the display shows oF, it was not
■
possible to establish a connection.
Enter the password again, ensuring
that it is spelt correctly.
Check whether the refrigerator is
located within the range of the
home network (WLAN).
Repeat the process.
Connecting the refrigerator to the app
Once the connection between the
refrigerator and the home network has
been established, you can connect the
refrigerator with the app.
1. Press the super cooling button and
the lock/alarm off button
simultaneously to open the Home
Connect menu.
The display shows Cn.
Note
Press both buttons at exactly the
same time.Button operation is locked
if only the lock/alarm off button is
pressed for a longer period. Press the
lock/alarm off button again until the
lock is deactivated.
2. Press the compartment button
repeatedly until the displays PA
(pairing = connect with app) and oF
are shown.
14
3. Press the + button to connect the
appliance with the app.
The display shows an animation.
As soon as the refrigerator and the
app are connected, the display shows
on.
4. The refrigerator is displayed in the
Home Connect app on the mobile
device. To add, select the refrigerator
and add with the + button.
If the refrigerator is not automatically
displayed, in the Home Connect app
first select Search for domestic
appliances and then Connect
domestic appliance.
5. Follow the instructions in the app until
the process is complete.
The display shows PA and on.
■
The refrigerator has been
successfully connected to the app.
If the connection has failed, please
■
check whether the mobile device is
connected to the home network
(WLAN).
Finally connect the refrigerator
again to the app.
When the display shows Er, reset
■
the Home Connect settings and
perform set-up again from the
beginning.
Verify signal strength
You should verify the signal strength if no
connection can be established.
1. Press the super cooling button and
the lock/alarm off button
simultaneously to open the Home
Connect menu.
The display shows Cn.