Intel FALCON 8+ Flight Manual page 118

MAINTENANCE MANUAL
®
INTEL FALCON™ 8+ UAS
CONDITION
Noticeable sound
(decibel) change
during operation by
the propulsion system
Changes in the
propulsion system
.
during operation
Control inputs not
synchronized or
delayed
SERVICE / MAINTENANCE
112
REV 00
APR 2017
ACTION
 Further inspect entire aircraft with
emphasis on the propulsion system
components (i.e., Motors and
Propellers) or incorrect Propeller
mounting, damage and/or diminished
performance.
 For the motors, regular inspection for
bearing noise is recommended.
 Assess the need and extent of repairs
that may be needed for continued safe
flight operations.
 Further inspect entire aircraft including
the propulsion system components
(i.e., Motors and Propellers), incorrect
Propeller mounting or structural
damage to the Center Cross or Motor
Rail Mounts.

Assess the need and extent of repairs
that may be needed for continued safe
flight operations.
 Discontinue flight and/or avoid further
flight operations until further
inspection and testing of the control
link between the ground control unit
and the aircraft.
 Ensure accurate control
communications are established and
reliable prior to further flight to
circumvent possible loss of control
resulting in the risk of a collision or
flyaway.
 Assess the need and extent of repairs
that may be needed for continued safe
flight operations.
RESOLUTION
Remote Pilot Action:
See Propeller
Removal /
Installation, Section
8.8.2
Further Action:
Requires Repair from
Service Depot.
Remote Pilot Action:
See Propeller
Removal /
Installation, Section
8.8.2
Further Action:
Requires Repair from
Service Depot.
Remote Pilot Action:
See Compass
Calibration in Section
4.3.2.3
Further Action:
Requires Repair from
Service Depot.
© 2017 Intel Corporation. All rights reserved.