Points To Keep In Mind - Lennox FWCK Installation, Operating And Maintenance Manual

POINTS TO KEEP IN MIND

DANGER AND WARNING SIGNS
Abrasive
surfaces
ELECTRICAL CONNECTIONS
Make sure to open the power off switch before to install, repair or make maintenance works in the unit, in order to
prevent serious electrical injuries.
To install the unit, keep in mind local and national legislation.
ATTENTION - WARNING
Electrical shock hazard can cause
injury or death. Before attempting to
perform any service or maintenance
on the unit, turn OFF the electrical
power.
FILTER CLEANING
Check the air filter and
make sure it is not blocked
with dust or dirt
STANDARD GUIDELINES TO LENNOX EQUIPMENT
All technical data contained in these operating instructions including the diagrams and technical description remains the
property of Lennox and may not be used (except for the purpose of familiarizing the user with the equipment), reproduced,
photocopied, transferred or transmitted to third parties without prior written authorization from Lennox.
The data published in the operating instructions is based on the latest information available. We reserve the right to make
modifications without notice.
We reserve the right to modify our products without obligation to modify previously supplied goods.
These operating instructions contain useful and important information for the smooth operation and maintenance of your
equipment.
The instructions also include guidelines on how to avoid accidents and serious damage before commissioning the equipment
and during its operation and how to ensure smooth and fault-free operation. Read the operating instructions carefully before
starting the equipment, familiarize yourself with the equipment and handling of the installation and carefully follow the
instructions. It is very important to be properly trained in handling the equipment. These operating instructions must be kept in
a safe place near the equipment.
Like most equipment, the unit requires regular maintenance. This section concerns the maintenance personnel and management.
If you have any queries or would like to receive further information on any aspect relating to your equipment, do not hesitate
to contact us.
Low High
temperature temperature
Risk of injury with Electrical
moving objects voltage
The air filter cleaning operations do not
require technical service; however when
an electrical or mechanical operation
is required call an Engineer.
If the filter is dirty, wash it in a bowl
neutral soap and water, drying it in the
shade before inserting it in the unit.
17
Risk of injury with
rotating objects