Points To Bear In Mind - Lennox AQUALEAN AWC Application Manual

POINTS TO BEAR IN MIND

DANGER AND WARNING SIGNS
Abrasive
surfaces temperatures
ELECTRICAL CONNECTIONS
Make sure to switch off the power before installing, repairing or carrying out maintenance on the unit,
in order to prevent serious electrical injury.
Keep local and national legislation in mind when installing the unit.
ATTENTION - WARNING
Electrical shock hazard can cause injury or death. Before attempting to perform any service or maintenance on the unit, turn OFF
the electrical power.
The air fi lter cleaning operations do not require technical service; however when an electrical or mechanical operation is
required call an Engineer.
FILTER CLEANING
Check the air fi lter and make sure it is not blocked with dust or dirt
If the fi lter is dirty, wash it in a bowl neutral soap and water, drying it in the
shade before inserting it in the unit.
Standard Guidelines to Lennox equipment
All technical data contained in these operating instructions, including the diagrams and technical description remains the property
of Lennox and may not be used (except for the purpose of familiarizing the user with the equipment), reproduced, photocopied,
transferred or transmitted to third parties without prior written authorization from Lennox.
The data published in the operating instructions is based on the latest information available. We reserve the right to make modifi -
cations without notice.
We reserve the right to modify our products without notice without obligation to modify previously supplied goods.
These operating instructions contain useful and important information for the smooth operation and maintenance of your equip-
ment.
The instructions also include guidelines on how to avoid accidents and serious damage before commissioning the equipment and
during its operation and how to ensure smooth and fault-free operation. Read the operating instructions carefully before starting
the equipment, familiarize yourself with the equipment and handling of the installation and carefully follow the instructions. It is
very important to be properly trained in handling the equipment. These operating instructions must be kept in a safe place near
the equipment.
Like most equipment, the unit requires regular maintenance. This section concerns maintenance and management personnel.
If you have any queries or would like to receive further information on any aspect relating to your equipment,
do not hesitate to contact us.
• 2 •
Low High
temperatures
Risk of injury by Electrical
moving objects voltage
AQUALEAN - AWC/AWH - MIL118E-1407 / 10-2013
Risk of injury by
rotating objects