Points To Bear In Mind - Lennox CIC Series Installation, Operating And Maintenance

POINTS TO BEAR IN MIND

DANGER AND WARNING SIGNS
Abrasive
surfaces
ELECTRICAL CONNECTIONS
To prevent serious electrical injuries, make sure to switch off the power before doing any installa-
tion, repair or maintenance work on the unit.
To install the unit, bear in mind local and national legislation.
ATTENTION - WARNING
Electric shock can cause injury or death. Before
attempting to perform any service or maintenance on the
unit, turn OFF the electrical power, and check that the
fan has stopped.
CLEANING THE FILTER
Check the air filter and
make sure it is not blocked
with dust or dirt.
Standard Guidelines for Lennox equipment.
All technical data contained in these operating instructions, including diagrams and technical descriptions, remain the property
of Lennox and may not be used (except for the purpose of familiarizing the user with the equipment), reproduced, photocopied,
transferred or transmitted to third parties without prior written authorization from Lennox.
Data published in the operating instructions are based on the latest information available. We reserve the right to make
modifications without notice.
We reserve the right to modify our products without notice and with no obligation to modify goods previously supplied.
These operating instructions contain useful and important information for the smooth operation and maintenance of your equipment.
The instructions also include guidelines on how to avoid accidents and serious damage before commissioning the equipment and
during its operation and how to ensure smooth and fault-free operation. Read the operating instructions carefully before starting
the equipment, familiarize yourself with the equipment and with handling the installation and carefully follow the instructions. It is
very important to be properly trained in handling the equipment. These operating instructions must be kept in a safe place near
the equipment.
Like most equipment, the unit requires regular maintenance. This section concerns maintenance personnel and management.
If you have any queries or would like to receive further information on any aspect relating to your equipment, do not hesitate to
contact us.
Low High
temperatures temperatures
Risk of injury from Electrical
moving objects voltage
The air filter cleaning operations does not require
technical service; however, when an electrical or
mechanical operation is required, call an Engineer.
If the filter is dirty, wash it in a bowl with neutral soap
and water, drying it in the shade before re-inserting
it in the unit.
2
Risk of injury from
rotating objects