Initial Steps; Dvb-T Station Search - Odys TV 700-R Operating Instructions Manual

3 Initial Steps

3.1

DVB-T Station Search

Initial Installation
1. Connect the DVB-T antenna. Turn
the unit on.
2. Press the MODE button to switch to
DVB-T mode.
3. Press
For UK select "England".
4. Press the OK button to save the new setting.
5. Press the OK button again to resume.
6. Confirm the next prompt with "Yes" to start automatic station search.
Station Search via Menu
1. Turn the unit on and press the MODE button to switch to DVB-T mode
(DTV), if necessary.
2. Press to select menu item "Digital TV".
3. Press the OK button to access the menu.
4. Press to select menu item "Installation".
5. Press to select the desired search procedure.
6. We recommend selecting the option "Country scan".
7. Press the OK button to start station search.
8. Press "Exit" to exit the menu and return to the previous level.
Please note
If and how many station are received depends on your location and the availability
of DVB-T stations in this area.
DVB-T radio stations are not everywhere available.
Set the area in the system settings for DVB-T mode (chapter 12.2.3 – System
Setup).
Caution!
Please note that in DVB-T or analog TV mode NO AV output signal is available!
6
ODYS Slim TV 700-R
to select your OSD language and area.