Analog Tv Functions; Tv Program Selection - Odys TV 700-R Operating Instructions Manual

8 Analog TV Functions

Please note
Depending on the selected station or the current program the aspect ratio may have to be
changed. This cannot be changed in analog TV mode. These settings can only be
changed in DVB-T mode.
Caution!
Please note that no AV output signal is available in DVB-T or analog TV mode!
Turn the unit on and follow these steps.
Please observe chapter Fehler! Verweisquelle konnte nicht gefunden werden.
for setup and station search.
8.1

TV Program Selection

Press the MODE button to select analog TV mode.
1
Press or CH+ and CH- to access the stored TV channels in sequence.
2
Set the volume with the volume control on the right side of the unit.
3
Please note
In analog TV operation the volume can only be changed on the unit. The corresponding
buttons on the remote control are invalid.
ODYS Slim TV 700-R
25