Table of Contents
Advertisement
10.3
Startup in DVD Mode
1
Connect the unit via the supplied mains power adapter to a wall outlet.
2
Set the POWER ON/OFF switch on the left side of the unit to ON position.
Remove the transport lock from the DVD drive.
3
4
Open the DVD compartment and insert a disc with the label facing up; close the
disc compartment again.
5
Ensure that DVD mode is selected.
The DVD player automatically starts disc playback.
6
Set the volume with VOL+/VOL-.
Ensure that the volume was set before on the unit.
Operation
You can control the unit with the buttons on the unit or with the remote control. With
the remote control you have advanced functions.
ZOOM button
For DVDs cycle through 2x, 3x, 4x, 1/2, 1/3, 1/4 zoom.
This function is not available for CDs.
Many DVDs show black bars at top and bottom of the screen, even though set to
16:9 format.
Depending on the DVD adjust the TV TYPE in the DVD system setup (see chapter
12.3.1).
28
ODYS Slim TV 700-R
Advertisement
Table of Contents
