Safety Instructions - Odys TV 700-R Operating Instructions Manual

1 Safety instructions

Thank you for choosing our product. Please read this manual carefully and observe all
safety and operating instructions. Store the manual in a safe place for later reference.
The flash symbol displayed in a triangle warns the user of
dangerous electrical voltages inside the device that could lead to
electrical shocks with harmful effects to health if the device is used
incorrectly.
The exclamation point displayed in a triangle in the
documentation indicates dangers when using and
or
maintaining the device.
The information symbol in the documentation indicates useful
information and tips for using and maintaining the device.
Caution
Caution
The product contains a low-power laser device. In order to ensure
the safety of the laser device, do not remove any cover and
attempt to repair the unit. If any service is needed, please contact
the distributor or its authorized service center.
To reduce the risk of electric shock, do not remove the cover (or
back). No user-serviceable parts inside. Refer servicing to qualified
service personnel. Unplug the product from the wall outlet before
servicing or when it is unused for a long period of time.
The manufacturer should not hold responsibility for the damage
caused by any substitutions and modifications of the product
without authorization from the manufacturer or authorized unit.
Power supply
Connect the power supply cable to the DC 9V IN jack on the left
side of the device. Connect the power plug to an earthed socket
AC 100-240 V. If you have problems when plugging the mains plug
into the socket, rotate the plug by 180° and plug it in again.
2
ODYS Slim TV 700-R
The device is a class 1 laser product. The
corresponding label is located on the rear side of
the device. When the housing has been opened
and the lock is not engaged, visible laser
radiation can escape. Avoid looking into the
laser beam by all means.