Odys TV 700-R Operating Instructions Manual page 46

Wake-up Timer Setup
This function allows time-controlled actions, such as recording a certain program at a
certain time.
The unit must be in on mode.
Enter the desired settings and press the OK button to save.
Timer Num.
Timer mode
On mode
On mode can be defined as "Wake-up alarm" or "Wake-up channel".
Wake-up alarm
Wake-up channel
Date
On-time
Duration
Please note
Please note that this function cannot be used to turn the unit on.
Please note the notices for the recording function.
Parental Lock
You can lock individual channels; these are only available after entering the password.
The default password is "0000".
See chapter 12.2.1 – Station Management.
12.2.4 Software Update
The latest software can be installed on this unit.
Please follow all instructions supplied with the update.
Updates are available from the website www.odys.de. If no updates are available no
later versions than the installed version are available for this unit.
46
ODYS Slim TV 700-R
Up to 8 timer events can be saved.
Select the repeat mode for the timer event (1-8).
Select the type of action for the specified point in time.
If on mode is set to "Note" you can select predefined
notes to be displayed.
If on mode is set to "On", "Channel" or "Record" the
channel can be defined, which is played when the unit
turns on.
On-date for the active timer event.
On-time for the active timer event.
Defines the duration, how long the unit stays turned on.