Advertisement
z Play / Pause / Stop mode
1. To interrupt, press the "Play/Pause/Stop button (10) once, the Play LED indicator (14) will be flashing. Press
again to resume normal playback.
2. If you press and hold the "Play/Pause/Stop button (11) for two seconds during playback mode. The system will
go to stop mode.
3. To start playback again, press the "Play/Pause/Stop" button (11) to start playback, the first track will start
playback and the Play LED indicator (14) will light up.
z Skip/Search mode (skip/search up
1. During play or pause mode, if "Skip Up" Button (10) is pressed. It will go to next track and then remain in the play
or pause mode.
2. During play or pause mode, if "Skip Down" Button (10) is pressed. It will go back to the beginning of the track
and remain the play or pause mode.
3. After step 2, press "Skip Down" Button (10) again will go to the previous track and remain the play or pause
mode.
4. If you press and hold the "Skip Up/Down" button (10) during playback, the playing track will go fast forward or
backward until the button is released.
z +10/-10 tracks(by remote handset)
1.
Press " +10 button (12) /-10 button (on remote control) to skip to your favorite track quicker with more convenience.
Remark
-
The system can detect and read the file under MP3 format only though the USB port.
-
If you connect the system to MP3 player via the USB socket, due to variances in MP3 encoding format,
some MP3 players may not be able to play via the USB socket. This is not a malfunction of the system.
MP3 track format requirement:-
- MP3 bit rate : 32 KBPS~256 KBPS.
z Repeat/random mode
Press the Repeat/Random Button (7) before or during playback, a single track or all the tracks can be played in
different mode ass follow :
PLAY MODE
REPEAT SINGLE TRACK
REPEAT ALL TRACKS
RANDOM MODE
OFF MODE
z
Repeat play
You can listen the desired track, or all tracks repeatedly by this function.
z
Random play
You can listen all the tracks in a random order by this function.
Bluetooth connecting and Playback
1.
Select the Main Function selector (7) to " BT " mode.
2.
The Bluetooth LED indicator (16) will be flashing, this means the Bluetooth not connected yet / searching mode.
3.
Switch on the Bluetooth feature of your Bluetooth device (such as mobile phone) and select "PTT25UBT"
Bluetooth equipment to connect.
4.
Once the connection is finished and connection is successfully, the Bluetooth LED (16) will change to light up.
5.
Start to playback your Bluetooth device and enjoy the music by the main unit.
/ skip/search down
REP/RAN
LED INDICATOR
STATUS
FLASH IN RED COLOR
LIGHT UP IN RED COLOR
LIGHT UP IN GREEN COLOR
-----------------
)
3
Advertisement
