Operating The Answer Machine (A150A/A250A Only); Last Number Redial List; Calls List/Answer Machine List/Network Mailbox List - Gigaset A150 Manual

Using shortcut keys
You can assign directory entries to the keys 2–9:
¤ ¤
s u
¤ (select entry) ¤ MENU
u
(select key) OK or
To dial, press and hold the required shortcut key.

Last number redial list

This list contains the ten last dialled numbers.
Dialling from the last number redial list
¤
u
(press briefly) (select entry)
Managing entries in the last number redial list
¤
u
(press briefly) (select entry)
The following functions can be selected with
Entry/Delete List

Calls list/answer machine list/network mailbox list

¤ ¤
Press MENU Messages OK, to open the list overview. If you have new messages,
only lists with new messages are displayed. Scroll through the lists by pressing
An advisory tone sounds as soon as a new entry appears in the calls list/answer
machine list/network mailbox list. New messages appears in the display.
Please note
If calls are saved in the network mailbox, you will receive a message if the appro-
priate settings have been made (depending on your network provider).
Calls list
¢
Prerequisites: CLIP ( page 6)
Depending on the type of list set, the calls list contains (
missed calls and calls recorded from the answer machine (A150A/A250A only).
Depending on the type of list set, all numbers of the last 25 incoming calls are saved
or just the missed calls are saved.
Open the calls list ¤ ¤ ¤
u
MENU Messages OK
The calls list is displayed as follows:
Number of new entries + number of old, read entries
Press OK to open the list.
The last incoming call is displayed. If necessary, use
¤ ¤
u
Shortcut OK
~
(press the key you want to assign the entry to)
¤
¤
MENU
u
: Use Number/Copy to Dir./Delete
¢
page 16) answered calls,
CallsList
CallsList 01+02
u
to select another entry.
7
Using other functions
¤
u
(select entry) MENU
The following functions can be selected with
Time/Status/Delete List
Calling back a caller from the calls list
¤ ¤
MENU Messages
Answer machine list (A150A/A250A only)/network mailbox list
You can use these lists to listen to messages on the answer machine (see "Playing
back/deleting messages"

Operating the answer machine (A150A/A250A only)

¢
The answer machine is operated from the handset or via the keys on the base
( page 2). You can record your own announcement messages using the handset.
The pre-recorded announcement is used if no personal announcement is available.
If the memory is full, Memory full! appears in the display and the answer machine
u
switches itself off automatically. It activates again automatically when you delete old
.
messages.
The answer machine has already been preset at the factory. Make individual settings
using the handset.
How to set a delay time (time period after which you would like the answer machine
to answer a call), as well as how to set the recording length and activate call screening
during the recording, see menu overview
Activating/deactivating the answer machine
¤
u
MENU Answer Machine
When you switch on the answer machine, the
Recording your own announcement
¤
u
MENU Answer Machine
¤ ¤
OK Speak after OK
You hear the ready tone (short tone). Now say your announcement (at least 3 sec.).
Press OK to confirm or press
announcement is played back for you to check.
Please note:
Recording ends automatically when the max. recording time of 170 seconds is
reached or if there is a break in speaking of more than 2 seconds.
u
: Delete Entry/Copy to Dir./Date/
¤ ¤
u
CallsList 01+02 OK (select entry)
¢ ¢
page 8) or network mailbox (
¢
page 15.
¤ ¤
u
OK Answer Mach.
±
icon appears in the display.
¤ ¤
u
OK Announcements
¤
OK
"
a
or to reject your recording. After recording, the
¤
page 9).
¤
‰
OK ( = on)
¤ ¤
OK Rec announce