Setting the time and the time
format in the instrument
panel with the clock
On the type 1 instrument panel (without audio
system), to adjust the time, use buttons A and
B then carry out the operations in the following
order:
F press buttons A and B simultaneously:
the minutes flash,
F press A to increase the minutes or B to
reduce the minutes,
F press buttons A and B simultaneously:
the hours flash,
F press A to increase the hours or B to
reduce the hours,
F press buttons A and B simultaneously:
24 H or 12 H is displayed and flashes,
F press button A or B to change the format,
F press buttons A and B simultaneously to
exit from time setting.
After approximately 30 seconds without any
action, the screen returns to the normal display.
Setting units in the instrument
panel with the clock
On the type 1 instrument panel (without audio
system), to change the display units, use
buttons A and B then carry out the operations
in the following order:
F press buttons A and B simultaneously for
three seconds: km/h or mph flashes,
F press button A or B to change the units,
F press buttons A and B simultaneously to
exit from setting units.
After approximately 30 seconds without any
action, the screen returns to the normal display.
Setting the time and units
in the multifunction screen
The other instrument panels are associated
with an audio system and a multifunction
screen. Refer to the corresponding screens.
Instruments
1
37