Hide thumbs Also See for C4:
Table of Contents

Advertisement

Bonnet

Opening
Before doing anything under the 
bonnet, switch off the Stop & Start
system to avoid any risk of injury 
resulting from an automatic change to 
START mode.
The cooling fan may start after switching
off the engine: take care with articles and
clothing that might be caught by the fan
blades.
F  Open the front left door.
F Pull the interior bonnet release lever A,
located at the bottom of the door aperture.
The location of the interior bonnet
release lever prevents opening of 
the bonnet while the front left door is
closed.
F  Push the exterior safety catch B to the left
and raise the bonnet.
F  Unclip the stay C from its housing on the 
back of the bonnet.
F  Fix the stay in the notch to hold the bonnet 
open.
Practical information
Do not open the bonnet in high winds.
When the engine is hot, handle the 
exterior safety catch and the bonnet 
stay with care (risk of burns).
Because of the presence of electrical
equipment under the bonnet, it is 
recommended that exposure to water 
(rain,   w ashing, ...) be limited.
Closing
F  Take the stay out of the support notch.
F  Clip the stay in its housing on the back of 
the bonnet.
F Lower the bonnet and release it at the end
of its travel.
F  Pull on the bonnet to check that it is 
secured correctly.
7
223

Advertisement

Table of Contents
loading

Table of Contents