Rear lamps
Model with conventional lamps
(type 1)
1.
Brake lamp / sidelamp (P21/5W).
2. Direction indicator (PY21W amber).
3. Reversing lamp (P21W).
4. Rear foglamp (P21W).
Amber bulbs, such as those for the
direction indicators, must be replaced
by bulbs of the same rating and colour.
The lamps on the tailgate are dummy
units. They are there for aesthetic
purposes only.
Model with 3D rear lamps
1.
Brake lamp (P21W).
2. Sidelamp (R10W).
3. Direction indicator (PY21W amber).
4. Rear foglamp, offside (P21W).
5. Reversing lamp, nearside (P21W).
In the event of a breakdown
Access to rear lamps
You will need a flat screwdriver and a 10 mm
box spanner.
The four bulbs are changed from inside the
boot:
F open the boot,
F remove the access flap from the
corresponding side trim panel,
F unclip the lamp unit connector,
F as a precaution, place a cloth in the bottom
of the housing to catch the nut if it is
dropped on removal,
F slacken the hexagonal nut using a 10 mm
box spanner then remove the nut by hand,
F carefully remove the lamp unit by pulling
out it straight out towards the rear.
8
257