Rear seats
Bench seat with fixed one-piece cushion and split backrests (1/3 - 2/3) which can be folded
individually to adapt the load space in the boot.
Rear head restraints
These have one position for use (up) and a
stowed position (down).
They can also be removed.
To remove a head restraint:
F release the backrest using control 1,
F tilt the backrest 2 slightly forwards,
F pull the head restraint upwards to the stop,
F then, press the lug A.
Never drive with the head restraints
removed; they must be in place and
correctly adjusted.
Folding the backrest
F Move the corresponding front seat forward
if necessary.
F Position the seat belt between the outer
and centre head restraints to avoid
trapping the belt when repositioning the
seat backrest.
F Place the head restraints in the low
position.
Ease of use and comfort
F Pull control 1 forwards to release the seat
back 2.
F Fold the seat back 2 on to the cushion.
3
115