JVC KD-S871R Service Manual page 8

KD-S871R
Removing the control switch board
Prior to performing the following procedure, remove
the front panel assembly.
1. Remove the four screws G attaching the rear cover
on the back of the front panel assembly.
2.
Unjoint the eleven joints c with the front panel and
the rear cover.
3. Remove the control switch board on the back of the
front panel.
1-8
Downloaded from www.Manualslib.com
(See Fig.10 to 12)
manuals search engine
G
G
Front panel
Joints c
Front panel
G
G
Rear cover
Fig.10
Joints c
Rear cover
Joints c
Fig.11
Control switch board
Fig.12
Joints c