JVC KD-S890 Instruction Manual

JVC KD-S890 Instruction Manual

Cd receiver
Hide thumbs Also See for KD-S890:

Advertisement

CD RECEIVER
RECEPTOR CON CD
RECEPTEUR CD
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l'installation et les raccordements, se référer au manuel séparé.
ATT
SOUND
U
R
SOURCE
F
D
VOL
VOL
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
KD-S890
KD-S890
KD-S890
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
Retain this information for future
reference.
Model No.
Serial No.
GET0132-001A
[J]

Advertisement

Table of Contents
loading

Summary of Contents for JVC KD-S890

  • Page 1 Pour l’installation et les raccordements, se référer au manuel séparé. MANUEL D’INSTRUCTIONS SOUND SOURCE INSTRUCTIONS MANUAL DE INSTRUCCIONES KD-S890 KD-S890 KD-S890 For customer Use: Enter below the Model No. and Serial No. which are located on the top or bottom of the cabinet.
  • Page 2: How To Reset Your Unit

    3. CAUTION: Do not open the top cover. There are no user-serviceable parts inside. Leave all servicing to qualified service personnel. 4. CAUTION: This CD player uses invisible laser radiation, however, is equipped with safety switches to prevent radiation emission when unloading CDs. It is dangerous to defeat the safety switches.
  • Page 3: Table Of Contents

    Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. CONTENTS How to reset your unit ... How to use the M (MODE) button ...
  • Page 4: Location Of The Buttons

    LOCATION OF THE BUTTONS Control panel Display window (standby/on/attenuator) button 2 SEL (select) button 3 Control dial 4 Display window 5 Loading slot /¢ buttons 7 FM/AM button 8 5 (up) button +10 button 9 0 (eject) button p ∞ (down) button –10 button q DISP (display) button •...
  • Page 5: Remote Controller

    Remote controller SOUND SOURCE 1 • Turns on the unit if pressed when the unit is turned off. • Turns off the unit if pressed and held until “SEE YOU” appears on the display. • Drops the volume level in a moment if pressed briefly.
  • Page 6: Preparing The Remote Controller

    Preparing the remote controller Before using the remote controller: • Aim the remote controller directly at the remote sensor on the main unit. Make sure there is no obstacle in between. Remote sensor • Do not expose the remote sensor to strong light (direct sunlight or artificial lighting).
  • Page 7: Basic Operations

    Turning on the power Turn on the power. Note on One-Touch Operation: When you select a source in step 2 below, the power automatically comes on. You do not have to press this button to turn on the power. Select the source. To operate the tuner (FM or AM), see pages 9 –...
  • Page 8: Setting The Clock

    Setting the clock Press and hold SEL (select) for more than 2 seconds. “CLOCK H,” “CLOCK M,” “LEVEL,” “SCROLL,” or “TAG DISP” appears on the display. Set the hour. 1 Select “CLOCK H” (hour) if not shown on the display. 2 Adjust the hour.
  • Page 9: Radio Operations

    Listening to the radio You can use either automatic searching or manual searching to tune in to a particular station. Searching a station automatically: Auto search Select the band (FM 1 – 3, AM). Each time you press the button, the band changes as follows: Selected band appears.
  • Page 10: Storing Stations In Memory

    Tune in to a station you want while “M” (manual) is flashing. To tune in to stations of higher frequencies To tune in to stations of lower frequencies • If you release your finger from the button, the manual mode will automatically turns off after 5 seconds.
  • Page 11: Tuning In To A Preset Station

    Manual preset You can preset up to 6 stations in each band (FM1, FM2, FM3, and AM) manually. Ex.: Storing FM station of 88.3 MHz into the preset number 1 of the FM1 band. Select the band (FM1 – 3, AM) you want to store stations into (in this example, FM1).
  • Page 12: Cd Operations

    CD OPERATIONS Refer to “MP3 OPERATIONS” on pages 18 to 21 for operating MP3 discs. Playing a CD Insert a CD into the loading slot. The unit turns on, draws the CD and starts playback automatically. Note on One-Touch Operation: When a CD is already in the loading slot, pressing CD turns on the unit and starts playback automatically.
  • Page 13: Locating A Track Or A Particular Portion On A Cd

    Locating a track or a particular portion on a CD To fast-forward or reverse the track Press and hold ¢ while playing a CD, to fast-forward the track. Press and hold 4 while playing a CD, to reverse the track. To go to the next or previous tracks Press ¢...
  • Page 14: Selecting Cd Playback Modes

    Selecting CD playback modes To play back tracks at random (Disc Random Play) You can play back all tracks on the CD at random. Press M (MODE) to enter the functions mode while playing a CD. Press RND (random), while still in the functions mode, so that “DISC RND”...
  • Page 15: Playing A Cd Text

    Playing a CD Text In a CD Text, some information about the disc (its disc title, performer, and track title) is recorded. This CD Text information will be shown automatically when you play a CD Text. To change the CD Text information manually, select text display mode while playing a CD Text.
  • Page 16: Mp3 Introduction

    MP3 INTRODUCTION What is MP3? MP3 is an abbreviation of Motion Picture Experts Group (or MPEG) Audio Layer 3. MP3 is simply a file format with a data compression ratio of 1:10 (128 Kbps*). That means, by using MP3 format, one CD-R or CD-RW can contain 10 times as much data volume as a regular CD can.
  • Page 17 MP3 folder/file configuration : Root ROOT : Folders : MP3 files Note: There is no limit on the number of the hierarchy levels (nested folders). However, up to 8 hierarchy levels is recommended for stable operations. MP3 playback/search order • The numbers in circles below the MP3 files ( the MP3 files.
  • Page 18: Mp3 Operations

    (See also page 19.) • If you change the source or turn the power off, disc playback stops (without ejecting the disc). Next time you select the CD player as the source, disc play starts from where playback has been stopped previously.
  • Page 19: Locating A File Or A Particular Portion On An Mp3 Disc

    To change the display information While playing back an MP3 file, you can change the MP3 disc information shown on the display. Each time you press DISP (display), the display changes to show the following: • When “TAG DISP” is set to “TAG ON” (initial setting: see page 24) Album name / performer (folder name*)
  • Page 20 Press +10 or –10. To skip 10 files* forwards to the last file To skip 10 files* backwards to the first file * The first time you press +10 or –10 button, the file skips to the nearest higher or lower file with a file number of multiple ten (ex.
  • Page 21: Selecting Mp3 Playback Modes

    Selecting MP3 playback modes To play back files at random (Folder Random/Disc Random Play) You can play back all files of the current folder or all files on the MP3 disc at random. Press M (MODE) to enter the functions mode while playing an MP3 disc.
  • Page 22: Sound Adjustments

    SOUND ADJUSTMENTS Selecting preset sound modes (C-EQ: custom equalizer) You can select a preset sound mode (C-EQ: custom equalizer) suitable to the music genre. Select the sound mode you want. When you press the button once, the last selected sound mode is recalled and applied to the current source.
  • Page 23: Adjusting The Sound

    Adjusting the sound You can adjust the sound characteristics to your preference. Select the item you want to adjust. Each time you press the button, the adjustable items change as follows: (bass) (treble) LOUD (volume) (loudness) Indication To do: BAS* Adjust the bass.
  • Page 24: Other Main Functions

    OTHER MAIN FUNCTIONS Changing the general settings (PSM) You can change the level display, scroll mode, and tag display by using the PSM (Preferred Setting Mode) control. Basic Procedure Press and hold SEL (select) for more than 2 seconds. “CLOCK H,” “CLOCK M,” “LEVEL,”...
  • Page 25: Detaching The Control Panel

    Detaching the control panel You can detach the control panel when leaving the car. When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder. Detaching the control panel Before detaching the control panel, be sure to turn off the power.
  • Page 26: Troubleshooting

    The antenna is not connected firmly. Disc is inserted upside down. CD-R/CD-RW is not finalized. Disc is locked. The CD player may function incorrectly. You are driving on rough roads. Disc is scratched. Connections are incorrect. No disc is in the loading slot.
  • Page 27 Symptoms • Disc cannot be played No MP3 files are recorded on back. the disc. MP3 files do not have the extension code—mp3 in their file names. MP3 files are not recorded in the format compliant with ISO 9660 Level 1, Level 2, or Joliet. •...
  • Page 28: Maintenance

    • After starting the heater in the car. • If it becomes very humid inside the car. Should this occur, the CD player may malfunction. In this case, eject the disc and leave the unit turned on for a few hours until the moisture evaporates.
  • Page 29: Specifications

    Capture Ratio: 1.5 dB [AM Tuner] Sensitivity: 20 µV Selectivity: 35 dB SPECIFICATIONS CD PLAYER SECTION Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 000 Hz...
  • Page 30 US RESIDENTS ONLY Having TROUBLE with operation? Please reset your unit Refer to page of How to Reset Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! EN, SP, FR 0103KKSMDTJEIN © 2003 VICTOR COMPANY OF JAPAN, LIMITED...
  • Page 31 • The following illustration shows a typical installation. However, you should make adjustments corresponding to your specific car. If you have any questions or require information regarding installation kits, consult your JVC car audio dealer or a company supplying kits. Before mounting: Press (control panel release button) to detach the control panel if already attached.
  • Page 32 Poignée Liste des pièces pour l’installation et raccordement Les pièces suivantes sont fournies avec cet appareil. Après vérification, veuillez les placer correctement. RM-RK50 For KD-S890 Para KD-S890 Pour le KD-S890 Remote controller Mando a distancia Télécommade Battery Pila Pile CR2025...
  • Page 33: Electrical Connections

    • Maximum input of the speakers should be more than 50 W (for KD-S890) and 45 W (for KD-S7350/KD-S690) both at the rear and at the front, with an impedance of 4 Ω to 8 Ω. • Be sure to ground this unit to the car’s chassis.
  • Page 34 Solo para KD-S890/KD-S7350 : Podrá conectar otro amplificador de potencia para los altavoces delanteros. Seluement pour le KD-S890/KD-S7350 : Vous pouvez connecter un autre amplificateur de puissance pour les enceintes avant. LOCALIZACION DE AVERIAS • El fusible se quema.

This manual is also suitable for:

Kd-s890jKd-s690

Table of Contents