About Firmware Update - Onkyo TX-RZ3100 User Manual

Settings
Firmware Update
About Firmware Update
There are two methods for updating the firmware: via network and via USB.
Use the one that best suits your environment.
For the latest information on updates, visit our company's website. There is no
need to update the firmware on this unit if there is no update available.
Before updating, make sure that the speaker setup microphone is not
connected.
During an update, do not
– Disconnect and reconnect any cable, USB storage device, speaker setup
microphone or headphones, or perform any operation on the component
such as turn off its power
– Accessing this unit from a PC or smartphone using an application
The update may take about 20 minutes to complete for either method: via
network or via USB. Furthermore, existing settings are guaranteed regardless
of the method used for update.
Note that when this unit is connected to a network, you may see notifications
about firmware updates on the display. To execute updating, select "Update Now"
with the cursor buttons of the remote controller and press ENTER. The unit
automatically turns itself into standby mode after "Completed!" appears on the
display, and updating will be complete.
Disclaimer: The program and accompanying online documentation are furnished
to you for use at your own risk.
Our company will not be liable and you will have no remedy for damages for any
claim of any kind whatsoever concerning your use of the program or the
accompanying online documentation, regardless of legal theory, and whether
arising in tort or contract.
In no event will our company be liable to you or any third party for any special,
indirect, incidental, or consequential damages of any kind, including, but not
limited to, compensation, reimbursement or damages on account of the loss of
present or prospective profits, loss of data, or for any other reason whatsoever.