Onkyo TX-RZ3100 User Manual page 24

Height 2
Default Value: 0.0 dB
After selecting the speaker frequency from between 25 Hz" and "16 kHz" with
the cursors
/ , adjust the volume of that frequency between "－6.0 dB" and "＋6.0 dB"
with / .
Surround
Default Value: 0.0 dB
After selecting the speaker frequency from between 25 Hz" and "16 kHz" with
the cursors
/ , adjust the volume of that frequency between "－6.0 dB" and "＋6.0 dB"
with / .
Surround Back
Default Value: 0.0 dB
After selecting the speaker frequency from between 25 Hz" and "16 kHz" with
the cursors
/ , adjust the volume of that frequency between "－6.0 dB" and "＋6.0 dB"
with / .
Subwoofer
Default Value: 0.0 dB
After selecting the speaker frequency from between 25 Hz" and "160 Hz" with
the cursors
/ , adjust the volume of that frequency between "－6.0 dB" and "＋6.0 dB"
with / .
This cannot be selected if "No" is set in "Configuration" ­ "Subwoofer".
The result may not be as expected depending on the input source and listening
mode setting.
7. THX Audio
Back Speaker Spacing
Default Value: >4.0 ft/>1.2 m
Select the distance between the surround back speakers from "
<1.0 ft/<0.3 m", "1.0 ­ 4.0 ft/0.3 ­ 1.2 m", and ">4.0 ft/>1.2 m".
The unit of distance (feet / meters) shown is the unit selected for use in
"Distance".
If an item cannot be selected even though connection is correct, check
that the settings in "Configuration" ­ "Speaker Channels" matches the
number of connected channels.
THX Ultra2 / Select2 Subwoofer
Default Value: No
Set "Yes" or "No" of the connection of the THX certified subwoofer.