Onkyo TX-RZ3100 User Manual page 29

2. After inputting, select "OK" with the cursors and press ENTER.
The input name will be saved.
To name a preset radio station, press TUNER on the remote controller, select
AM/FM and select the preset number.
This cannot be set if the "NET" or "BLUETOOTH" input is selected.
Audio Select
Select the priority for input selection when multiple audio sources are connected to
one input selector, such as connections to both the "BD/DVD" HDMI IN jack and
the "BD/DVD" AUDIO IN jack. The setting can be separately set to each input
selector button. Select the input selector to configure. Note that there are some
default values you cannot change.
Audio Select
Default Value: BD/DVD: HDMI CBL/SAT: HDMI GAME: HDMI STRM BOX:
HDMI PC: HDMI AUX: HDMI CD: OPTICAL TV: OPTICAL PHONO:
Analog
"ARC": When giving priority to input signal from ARC compatible TV.
The setting can be selected only when "5. Hardware" ­ "HDMI" ­ "Audio
Return Channel" is set to "Auto" and also the "TV" input is selected.
"HDMI": When giving priority to input signal from HDMI IN jacks
The setting can be selected only when the input is assigned to the HDMI
jack in the "1. Input/Output Assign" ­ "HDMI Input" setting.
"COAXIAL": When giving priority to input signal from DIGITIAL IN COAXIAL
jacks
The setting can be selected only when the input is assigned to the
COAXIAL jack in the "1. Input/Output Assign" ­ "Digital Audio Input"
setting.
"OPTICAL": When giving priority to input signal from DIGITIAL IN OPTICAL
jacks
The setting can be selected only when the input is assigned to the
OPTICAL jack in the "1. Input/Output Assign" ­ "Digital Audio Input"
setting.
"Analog": To always output analog audio independently of the input signal
The setting can be selected only when the input is assigned to the AUDIO
IN jack in the "1. Input/Output Assign" ­ "Analog Audio Input" setting.
PCM Fixed Mode
Default Value: Off
Select whether to fix input signals to PCM (except multi­channel PCM) when
you have selected "HDMI", "COAXIAL", or "OPTICAL" in the "Audio Select"
setting. Set this item to "On" if noise is produced or truncation occurs at the
beginning of a track when playing PCM sources. Select "Off" normally.
Changing "Audio Select" changes the setting to "Off".
The setting cannot be changed when "TUNER", "NET", or "BLUETOOTH" input
is selected.