Onkyo TX-RZ3100 User Manual page 37

Bluetooth Wakeup
Default Value: Off
This function wakes up the unit on standby by connecting a BLUETOOTH
enabled device.
"On": Use this function
"Off": Do not use this function
Setting to "On" increases the power consumption even when the unit is on
standby. However, the increase in power consumption is kept to a
minimum by automatically entering the HYBRID STANDBY mode, where
only the essential circuit is operating.
This setting is fixed to "Off" if "Bluetooth" ­ "Auto Input Change" is set to
"Off".
Wait for a while if "Network Standby" and "Bluetooth Wakeup" cannot be
selected. It will appear when the network feature is started.
5. 12V Trigger
Zone
Default Value: Main
Set which zone to output the 12V trigger when playing. If you select "All",
then the 12V trigger is output to all zones that are playing.
6. Multi Zone
Make settings related to Multi­zone Connection, such as the volume for the
separate room.
1. Zone 2
Output Level
Default Value: Fixed
Select which of the integrated amplifier in a separate room or this unit should
be used to adjust the volume when Zone 2 is active.
"Fixed": Adjust on the Integrated amplifier in a separate room
"Variable": Adjust on the unit
Maximum Volume
Default Value: Off
Set the maximum value for Zone 2 to avoid too high volume. Select a value
from "Off", "50" to "99". (When "3. Audio Adjust" ­ "Volume" ­ "Volume
Display" is set to "Absolute")
Power On Volume
Default Value: Last