Hardware Installation - D-Link DHP-300 Quick Install Manual

Hardware Installation

Hardware Installation
Power
Plug the DHP-300 into an AC wall outlet or power strip.
Note: Power source is confirmed when the green LED Power Indicator
on the DHP-300 is illuminated.
Connect the Ethernet Cable
Connect the included Ethernet cable to the network cable connector
located on the DHP-300 and attach the other end of the Ethernet cable
to the network or PC.
Note: Network Connectivity is confirmed when the green Powerline
LED indicator on the DHP-300 is illuminated.
 D-Link DHP-300 Quick Install Guide