D-Link DHP-300 Quick Install Manual page 11

The screen on the previous pages displays the current configuration
of the DHP-300.
MAC: MAC Address of detected node.
Net ID: Powerline Network Name. Default is DHP-300 (Max 10
characters, 0-9, A-Z, case sensitive).
Alias: Device Name. Default is Device 1, Device 2 etc (Max 16
characters, 0-9, A-Z, case sensitive) ie. Living room, Bedroom, etc.
Location: Local or Remote nodes.
Quality: Network connection quality of the connected node.
• Three circles - Best powerline connection. Suitable for HD
video stream connection.
• Two circles - Better powerline connection. Suitable for SD
video stream connection.
• One circle - Good powerline connection. Suitable for data
and internet activity connection.
Scan: Scan the powerline network for PLC nodes. Check the
AutoScan box to scan the network periodically.
11 D-Link DHP-300 Quick Install Guide
Configuration